We hope that you find our calculator tool useful. But you must bare in mind that products and services may change from time to time. Although we do our best to ensure an accurate quote, we can not guarantee that actual pricing will be EXACTLY as show. Please also note that HST is not included is calculations. Furthermore, calculations are based on Oak species.





Enter the amount of existing spindles in your staircase. This needs to be populated even if your project does not involve new spindles
Spindles are the pieces of wood or wrought iron that hold up the handrail. The bottoms of the spindles are usually inserted into the stair treads.
The majority of staircases that we renovate involve outdated, light coloured Oak spindles, with a lathed design. Builders have been installing this style of spindle since the 1930's. If you are not planing to update the spindles, then leave this box blank

The majority of staircases that we renovate involve outdated, light coloured Oak newel posts, with a lathed design and a sphere on top. Builders have been installing this style of newel post since the 1930's. If you are not planing to update the posts, then leave this box blank
Newel Posts are not always present in a staircase. For example a boxed or closed staircase will normally not have any newel posts. If there are newel posts present in your staircase you will find them either at the bottom, a turn or at the top of the staircase. The newel posts that we normally update are 2-3/4" thick and have the profile mentioned above, and will carry a very similar profile to that of the spindles, when considering a traditional builders staircase. The difference of course is the posts are much thicker than the spindles.

Here you can choose what, if anything you would like us to do with regards to your stringers. If your stringers are currently white and you would like them to match the stained treads, then this entails having to veneer all of the stringer parts. White stringers with white risers are a more popular choice
Stringers are what support the staircase. For example If you have an open staircase with spindles, and you are standing on the floor looking up, you will notice the zig-zag piece of wood that travels the length of ths staircase directly under the cascading stair treads. That is the stringer. On the other hand, If you have a closed staircase, the stair treads will butt up to the stringer on either side. You may see this on a basement set of stairs, or if your staircase has a wall on either side.

Enter the total linear feet of all existing handrails that are to be sanded and finished. We peform all in-house stain matching. If no handrail work is required then leave this area blank.
Handrails are just the top part of the balstrade. The long piece of wood that you hold onto when using the staircase. This service is performed 99% of the time when we do a staircase renovation
To calculate linear feet of bullnose/footrail , simply add up all needed lengths
This question refers to any existing bullnose/footrail that will not be removed, but you would like the colour changed to match new scheme. We provide all in-house stain matching
Do not include any new bullnose/footrail that will be installed. If newly installed bullnose/footrail staining is desired, this will be calculated in question No. 31
Linear feet is calculated simply by adding all measured length’s of existing bullnose/footrail together.
If you would like us to stain and varnish new stair treads, check this box. We provide all in-house stain matching. We always prefinish treads at our shop before installation. This way you will have 24/7 access to your staircase during the renovation. You will also not be subjected to stain and/or varnish odours.
This procedure is inclusive of tack strip, underpad and staples being removed. If you will be removing the carpet yourself, do not check this box. Please note that if you plan to tackle this part of the project on your own, all carpet, underpad, tack strip and staples must be removed.
Although you are more than welcome to remove the carpet on your own, it is far simpler to remove carpet once handrail has been removed, which we must do.
Check this box if you would like us to supply the flooring material. If you will have the materials on site, then leave unchecked
Only populate this box if the square footage of your project is over 150 square feet
Do not include upper hallway in this calculation. See question No. 22 for upper hallway calculation
Square footage of area is calculated simply by multiplying the length of a room (or area) by its width
Choose the new type of flooring material to be installed
If hallway is greater than 150 square feet, just input 150 here. Add remainder of square footage to question #20. For example, if you have a 200 square foot upper hallway, you would input 150 in this box and add 50 to the calculation in question #20. Or just enter 50 in question #20 if no other flooring was previously inputted. (This reduces your costs)
Square footage of area is calculated simply by multiplying the length of a room (or area) by its width
Choose the new type of hallway flooring material to be installed
Enter total length of new baseboards & shoe trim in linear feet. If your plans are to provide and install baseboards and trim yourself then leave box blank
To calculate linear feet of baseboard and trim, simply add up all lengths of walls that will need new baseboards & trim atop floors
Enter total length of new straight bullnose/footrails in linear feet. Bullnose/footrails are the pieces of wood that finish the edge of a floor or landing. If you have a balcony area atop stairs, spindles will be inserted into the bullnose/footrail.
To calculate linear feet of bullnose/footrail , simply add up all needed lengths
Enter total length of new curve bullnose/footrail in linear feet. Curve bullnose/footrails are needed when the floors edge is curved. This needs to be finished with a custom made bullnose/footrail to fit your specific situation To measure the curve bullnose/footrail distance, simply measure along the inside of the curve from one side to the other side.
To calculate linear feet of curve bullnose/footrail, simply add all the lengths of curved edges needed to be covered.
Enter the primary type of flooring that will need to be removed. If you are removing the old flooring yourself then just leave this option blank. Please keep in mind, floor removal means floor preparation also. This means that the new floor is ready to be installed. For example, all underpad, tack strip around floor edges, nails and underpad staples have been removed and floor has been swept
Square footage of area is calculated by multiplying the length by its width
A selection here is only necessary if you are removing more than one “type” of flooring. For example you may want us to remove carpet everywhere with the exception of ceramic tiles in the foyer. Here is where you would choose “Tile”
Square footage of area is calculated by multiplying the length by its width
Check this box if you would like us to stain match newly installed materials. This includes new newel posts, bullnose/footrails, stringer veneer and spindles to your desired colour.
This includes carpet and underpad, as well as wood scraps and all other job related garbage. This charge can be avoided. We can leave the waste from the job neatly in the garage if desired.